Cisco Cisco Packet Data Interworking Function (PDIF) Guide De Dépannage
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Exec Modes Commands (D-S)
▀ logging filter
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
sitmain: System Initialization Task main logging facility
snmp: SNMP logging facility
srdb: Static Rating Database
srp: Service Redundancy Protocol (SRP) logging facility
ssh-ipsec: SSH IP Security logging facility stat: Statistics logging facility
stat: Statistics logging facility
system: System logging facility
tacacsplus: TACACS+ Protocol logging facility
threshold: threshold logging facility
ttg: TTG logging facility
udr: User detail record facility (used with the Charging Service)
user-data: User data logging facility
user-l3tunnel: User layer-3 tunnel logging facility
vpn: Virtual Private Network logging facility
wimax-data: WiMAX DATA
wimax-r6: WiMAX R6
Specifies the level of information to be logged from the following list which is ordered from highest to
lowest:
lowest:
critical - display critical events
error - display error events and all events with a higher severity level
warning - display warning events and all events with a higher severity level
unusual - display unusual events and all events with a higher severity level
info - display info events and all events with a higher severity level
trace - display trace events and all events with a higher severity level
debug - display all events
Default: critical-info enabled.
: specifies that events with a category attribute of critical information are to be displayed.
Examples of these types of events can be seen at bootup when system processes and tasks are being initiated.
: specifies that events with a category attribute of critical information are not to be
displayed.
Usage
Apply filters for logged data to collect only that data which is of interest.