Cisco Cisco Packet Data Interworking Function (PDIF) Guide De Dépannage
Exec Modes Show Commands (H-L)
show ip bgp ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
: name used to identify a VRF. Information is only gathered from the corresponding
VRF. If there is no such VRF, an error is reported.
: displays the network for which information in the BGP routing table.
: If specified along with the RD value, the information displayed is
gathered from the corresponding VRF whose RD value is the same as the specified value. If there is
no VRF associated with such an RD, an error is reported.
no VRF associated with such an RD, an error is reported.
:displays the network for which information in the BGP routing table.
:shows neighbor information for the all the vrfs including the default vrf or for the VRF
with a matching RD value.
:shows summary information of neighbors for all the vrfs including the default vrf or for the
VRF with a matching RD value.
Indicates the output of the command is to be piped (sent) to the command specified. A command to send
output to must be specified.
For details on the usage of
output to must be specified.
For details on the usage of
and
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter in the Command Line Interface Reference.
Usage
Use this command display to BGP information for the current context.
Example
The following command displays information for all BGP neighbors:
The following command displays information for all BGP neighbors: