Cisco Cisco Packet Data Interworking Function (PDIF) Guide De Dépannage
GTPP Server Group Configuration Mode Commands
gtpp trigger ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
No partial record closure for a time zone change occurs when this trigger is disabled. MS Time zone change
should be applicable only for 3GPP R6 based GTPP dictionaries.
should be applicable only for 3GPP R6 based GTPP dictionaries.
This trigger keyword is specific to the 2G SGSN and is proprietary (non-standard).
Default: Disabled
Enables the PLMNID change trigger for S-CDRs if the dictionary specified in the
Default: Disabled
Enables the PLMNID change trigger for S-CDRs if the dictionary specified in the
configuration supports the PLMNID change. If enabled, the SGSN generates a partial S-CDR when the MS
changes the PLMN while under the same SGSN (intra-system intra-SGSN PLMN-ID handover). Currently,
custom18 dictionary supports this trigger.
changes the PLMN while under the same SGSN (intra-system intra-SGSN PLMN-ID handover). Currently,
custom18 dictionary supports this trigger.
Default: Enabled
Enables the QoS-change trigger for CDRs. Disabling this trigger ignores a QoS-change and does not open a
new CDR for it.
Enables the QoS-change trigger for CDRs. Disabling this trigger ignores a QoS-change and does not open a
new CDR for it.
Default: Enabled
This keyword enable/disable the partial record closure for a RAT change. If disabled no partial record closure
for a RAT change occurs. RAT change should be applicable only for 3GPP R6 based GTPP dictionaries.
In SGSN, RAT change trigger (2G<->3G) means inter-service handoff (SGSN service <-> GPRS service). If
this trigger is enabled, after the RAT change interim CDR is generated. After this RAT change CDR, CDR
thresholds such as volume/time etc. and GTPP Group are applicable from new service. If RAT change trigger
is disabled, the CDR thresholds and GTPP group etc. will not change and will continue to use from old
service.
After the RAT change the System Type field in CDR changes to indicate the new system type. If this trigger
is disabled then the next CDR generated will indicate System Type but the data count in the CDR doesnot
necessarily belong to the system type indicated in CDR instead it may belong to both 2G and 3G as CDR is
not closing when handover takes place.
This keyword enable/disable the partial record closure for a RAT change. If disabled no partial record closure
for a RAT change occurs. RAT change should be applicable only for 3GPP R6 based GTPP dictionaries.
In SGSN, RAT change trigger (2G<->3G) means inter-service handoff (SGSN service <-> GPRS service). If
this trigger is enabled, after the RAT change interim CDR is generated. After this RAT change CDR, CDR
thresholds such as volume/time etc. and GTPP Group are applicable from new service. If RAT change trigger
is disabled, the CDR thresholds and GTPP group etc. will not change and will continue to use from old
service.
After the RAT change the System Type field in CDR changes to indicate the new system type. If this trigger
is disabled then the next CDR generated will indicate System Type but the data count in the CDR doesnot
necessarily belong to the system type indicated in CDR instead it may belong to both 2G and 3G as CDR is
not closing when handover takes place.
Important:
However System Type field in CDR related change is not applicable to customized CDR formats
which does not use System Type field
Enables the routing-area-update trigger for CDRs.
This keyword is for GGSN only.
Default: Enabled
Disabling this trigger ignores an SGSN change and does not add the SGSN IP address into the SGSN address
list of the CDR. This helps to reduce the release of CDRs due to SGSN changes crossing the configured limit.
also-intra-sgsn-multiple-address-group-change : This keyword includes Intra-SGSN group changes as an
SGSN change.
Default: Enabled
Disabling this trigger ignores an SGSN change and does not add the SGSN IP address into the SGSN address
list of the CDR. This helps to reduce the release of CDRs due to SGSN changes crossing the configured limit.
also-intra-sgsn-multiple-address-group-change : This keyword includes Intra-SGSN group changes as an
SGSN change.
Default: Enabled
When this trigger is disabled container closure does not happen for a tariff-time change.
This trigger is applicable for G-MB-CDRs for MBMS session too.
When this trigger is disabled container closure does not happen for a tariff-time change.
This trigger is applicable for G-MB-CDRs for MBMS session too.