Cisco Cisco Tunnel Terminating Gateway (TTG) Guide De Dépannage
AAA Server Group Configuration Mode Commands
▀ radius accounting
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
Default: 5
Specifies the maximum number of times communication with a AAA server will be attempted before it is
marked as ―Not Responding‖ and the detect dead server consecutive failures count is incremented.
Specifies the maximum number of times communication with a AAA server will be attempted before it is
marked as ―Not Responding‖ and the detect dead server consecutive failures count is incremented.
must be an integer from 0 through 65535.
Once the maximum number of retries is reached this is considered a single failure for the consecutive failures
count for detecting dead servers.
count for detecting dead servers.
Default: Disabled
Sets the maximum number of transmissions for a RADIUS accounting message before the message is
declared as failed.
Sets the maximum number of transmissions for a RADIUS accounting message before the message is
declared as failed.
must be an integer from 1 through 65535.
Default: 3
Specifies the amount of time to wait for a response from a RADIUS server before retransmitting a request.
Specifies the amount of time to wait for a response from a RADIUS server before retransmitting a request.
must be an integer from 1 through 65535.
Usage
Use this command to configure RADIUS accounting options according to the RADIUS server used for the
context.
context.
Example
The following command configures the accounting timeout parameter to 16 seconds.
The following command configures the accounting timeout parameter to 16 seconds.