Cisco Cisco Packet Data Interworking Function (PDIF) Guide De Dépannage
Context Configuration Mode Commands
▀ radius charging
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Sets the maximum number of re-transmissions for RADIUS authentication requests. This limit is used in
conjunction with the
conjunction with the
for each server.
When failing to communicate with a RADIUS sever, the subscriber is failed once all of the configured
RADIUS servers have been exhausted or once the configured number of maximum transmissions is reached.
For example, if 3 servers are configured and if the configured max-retries is 3 and max-transmissions is 12,
then the primary server is tried 4 times (once plus 3 retries), the secondary server is tried 4 times, and then a
third server is tried 4 times. If there is a fourth server, it is not tried because the maximum number of
transmissions (12) has been reached.
RADIUS servers have been exhausted or once the configured number of maximum transmissions is reached.
For example, if 3 servers are configured and if the configured max-retries is 3 and max-transmissions is 12,
then the primary server is tried 4 times (once plus 3 retries), the secondary server is tried 4 times, and then a
third server is tried 4 times. If there is a fourth server, it is not tried because the maximum number of
transmissions (12) has been reached.
must be an integer from 1 through 65535.
Default: 3
Specifies the number of seconds to wait for a response from the RADIUS server before re-sending the
messages.
Specifies the number of seconds to wait for a response from the RADIUS server before re-sending the
messages.
must be an integer from 1 through 65535.
Usage
Manage the basic Charging Service RADIUS options according to the RADIUS server used for the context.
Example