Cisco Cisco Packet Data Interworking Function (PDIF) Guide De Dépannage
Context Configuration Mode Commands
▀ radius server
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Sets the UDP communication port to the old default for RADIUS communications to 1645.
Default: 1812
Specifies the port number to use for communications.
Specifies the port number to use for communications.
must be an integer from 1 through 65535.
Default: 1000
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
must be a value in the range 1 through 1000
where 1 is the highest priority. When configuring two or more servers with the same priority you will be
asked to confirm that you want to do this. If you use the
asked to confirm that you want to do this. If you use the
option, you are not asked for
confirmation and multiple servers could be assigned the same priority.
Enable probe messages to be sent to the specified RADIUS server.
Disable probe messages from being sent to the specified RADIUS server. This is the default behavior.
The user name sent to the RADIUS server to authenticate probe messages.
must be an alpha
and/or numeric string of 1 through 127 characters in length.
The password sent to the RADIUS server to authenticate probe messages.
: This keyword is intended only for use by the system while saving configuration scripts. The
system displays the
keyword in the configuration file as a flag that the variable following the
keyword is the encrypted version of the plain text password. Only the encrypted password is
saved as part of the configuration file.
: Specifies the probe-user password for authentication.
must be an alpha
and/or numeric string of 1 through 63 characters in length.
Specifies the type of transactions the RADIUS server accepts.
: Specifies mediation-device specific AAA transactions. This device is available if
you purchased a transaction control services license. Contact your local sales representative for licensing
information.
information.
: Specifies standard AAA transactions. (Default)
Enables or disables the RADIUS authentication/accounting/charging server functionality, and saves the status
setting in the configuration file to re-establish the set status at reboot.
setting in the configuration file to re-establish the set status at reboot.