Cisco Cisco Packet Data Interworking Function (PDIF) Guide De Dépannage
SGSN Operator Policy Configuration Mode Commands
▀ rau-intra
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Default: Disabled
Enables the SGSN to reject an Intra-RAU procedure based on the detected 3GPP release version of the MS
equipment and selectively send a failure cause code in the reject message. The SGSN uses the following
procedure to implement this configuration:
Enables the SGSN to reject an Intra-RAU procedure based on the detected 3GPP release version of the MS
equipment and selectively send a failure cause code in the reject message. The SGSN uses the following
procedure to implement this configuration:
1. When Attach Request is received, the SGSN checks the subscriber‘s IMSI and current location
information.
2. Based on the IMSI, an operator policy is found that relates to this Attach Request.
3. Policy is checked for access limitations.
4. Attach Request is checked to see if the revision indicator bit is set
3. Policy is checked for access limitations.
4. Attach Request is checked to see if the revision indicator bit is set
if not, then the configured comon faiaure code for reject is sent;
if set, then the 3GPP release level is verified and action is taken based on the configuration of
this parameter
One of the following options must be selected and completed:
: Indicates the MS would be a 3GPP release prior to R99 and an appropriate failure
code should be defined.
: Enter an integer from 2 to 111.
: Indicates the MS would be a 3GPP Release 99 or later and an appropriate failure
code should be defined.
: Enter an integer from 2 to 111.
Usage
Use this command to configure the restrictions and function of the intra-RAU procedure.
Example