Cisco Cisco Packet Data Interworking Function (PDIF) Guide De Dépannage
Context Configuration Mode Commands
lns-service ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
lns-service
Enters the LNS Service Configuration Mode, or is used to add or remove a specified LNS service.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Removes the specified lac-service from the current context.
Specifies the name of a LNS service to configure, add, or remove. It can be from 1 to 63 alpha and/or
numeric characters in length and is case-sensitive.
numeric characters in length and is case-sensitive.
Usage
Enter the LNS Service Configuration Mode for an existing service or for a newly defined service. This
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
command is also used to remove an existing service.
A maximum of 256 services (regardless of type) can be configured per system.
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (i.e. resulting from such things as system handoffs). Therefore, it is recommended that a large
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Example
To add a new LNS service named
To add a new LNS service named
and enter the LNS Service Configuration Mode, enter the following
commands:
To configure an existing LNS service named
, enter the following command:
To delete an existing LNS service named
, enter the following command: