Cisco Cisco Tunnel Terminating Gateway (TTG) Guide De Dépannage
APN Configuration Mode Commands
qos rate-limit ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Downlink Traffic: Disabled
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): 16000000
Burst Size(in bytes): 65535
Exceed Action: lower-ip-precedence
Violate Action: drop
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): 16000000
Burst Size(in bytes): 65535
Exceed Action: lower-ip-precedence
Violate Action: drop
Uplink Traffic: Disabled
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): 8640000
Burst Size(in bytes): 65535
Exceed Action: lower-ip-precedence
Violate Action: drop
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): 8640000
Burst Size(in bytes): 65535
Exceed Action: lower-ip-precedence
Violate Action: drop
Class: Interactive, Traffic Handling Priority: 1
Downlink Traffic: Disabled
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Uplink Traffic: Disabled
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Class: Interactive, Traffic Handling Priority: 2
Downlink Traffic: Disabled
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Uplink Traffic: Disabled
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Class: Interactive, Traffic Handling Priority: 3
Downlink Traffic: Disabled
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Uplink Traffic: Disabled
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Class: Background
Downlink Traffic: Disabled
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Peak Data Rate(in bps): 16000000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Uplink Traffic: Disabled
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Peak Data Rate(in bps): 8640000
Committed Data Rate(in bps): n/a
Burst Size(in bytes): 65535
Exceed Action: n/a
Violate Action: drop
Important:
If a ―Subscribed‖ traffic class is received, the system changes the class to ―Background‖ and sets the
following parameters: The uplink and downlink guaranteed data rates are set to 0. If the received uplink or downlink
data rates are 0 and traffic policing is disabled, the default of 64 kbps is used. When enabled, the APN configured values
are used. If the configured value for downlink max data rate is larger than can fit in an R4 QoS profile, the default of 64
kbps is used. If either the received uplink or downlink max data rates is non-zero, traffic policing is employed if enabled
for the ―Background‖ class. The received values are used for responses when traffic policing is disabled.
data rates are 0 and traffic policing is disabled, the default of 64 kbps is used. When enabled, the APN configured values
are used. If the configured value for downlink max data rate is larger than can fit in an R4 QoS profile, the default of 64
kbps is used. If either the received uplink or downlink max data rates is non-zero, traffic policing is employed if enabled
for the ―Background‖ class. The received values are used for responses when traffic policing is disabled.
To calculate the burst size dynamically a new optional keyword
is
provide with
keyword. By default the burst size is fixed if defined in bytes with this
command. In other words irrespective of the rate being enforced, burst-size fixed as given in the
parameter.