Cisco Cisco Tunnel Terminating Gateway (TTG) Guide De Dépannage
Context Configuration Mode Commands
▀ default gtpp
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Restores the gtpp egcdr final record to the default settings to include content-ids with some data to report are
included. Also sets the closing cause to the default of using the same closing cause for multiple final
eGCDRs.
included. Also sets the closing cause to the default of using the same closing cause for multiple final
eGCDRs.
Restores the gtpp egcdr maximum number of List of Service Data Volume (LoSDV) containers in one
EGCDR to the default of 10.
EGCDR to the default of 10.
Restores the gtpp egcdr maximum number of List of Traffic Data Volume (LoTDV) containers in one
EGCDR to the default of 8.
EGCDR to the default of 8.
Restores the gtpp egcdr service-idle-timeout parameter to its default setting of 0.
Restores the gtpp max-cdrs parameter to its default setting of 1 CDR per packet.
Restores the gtpp max-pdu-size parameter to its default setting of 4096 octets.
Restores the gtpp max-retries parameter to its default setting of 4.
Restores the gtpp redirection-allowed parameter to its default setting of enabled.
Restores the gtpp timeout parameter to its default setting of 5.
Restores the gtpp triggers to their default settings.
Usage
After system parameters have been modified, this command is used to set/restore specific parameters to their
default values.
default values.
Example
The following command restores the gtpp max-pdu-size to its default setting of 4096 octets:
The following command restores the gtpp max-pdu-size to its default setting of 4096 octets: