Cisco Cisco Tunnel Terminating Gateway (TTG) Guide De Dépannage
Ethernet Interface Configuration Mode Commands
▀ crypto-map
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
crypto-map
Applies the specified IPSec crypto-map to this interface.
Product
PDSN, HA
Privilege
Security Administrator, Administrator
Syntax
Deletes the application of the crypto map on this interface.
Specifies the name of the crypto map being applied. The name can be from 1 to 127 alpha and/or numeric
characters and is case sensitive.
characters and is case sensitive.
Applies the crypto map to the secondary address for this interface that is specified by
.
must be specified using the standard IPv4/IPv6 notation.
Usage
In order for ISAKMP and/or manual crypto maps to work, they must be applied to a specific interface using
this command. Dynamic crypto maps should not be applied to interfaces.
The crypto map must be configured in the same context as the interface.
this command. Dynamic crypto maps should not be applied to interfaces.
The crypto map must be configured in the same context as the interface.
Example
To apply the IPSEC crypto map named cmap1 to this interface, use the following command:
To apply the IPSEC crypto map named cmap1 to this interface, use the following command: