Cisco Cisco Tunnel Terminating Gateway (TTG) Guide De Dépannage
Global Configuration Mode Commands
▀ qos npu inter-subscriber traffic priority
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Specifies a specific DSCP value. The value must be expressed as an integer value from 0 through 31.
Usage
The differentiated services (DS) field of a packet contains six bits (0-5) that represent the differentiated
service code point (DSCP) value.
Five of the bits (1-5) represent the DSCP. Therefore, up to 32 (25) DSCPs can be assigned to the various
priorities. By default, they're all assigned to the lowest priority (best-effort).
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
service code point (DSCP) value.
Five of the bits (1-5) represent the DSCP. Therefore, up to 32 (25) DSCPs can be assigned to the various
priorities. By default, they're all assigned to the lowest priority (best-effort).
For additional information on the NPU QoS functionality, refer to the System Administration and
Configuration Guide.
Important:
This functionality is not supported for use with the PDSN at this time.
Example
The following command maps the ef DSCP to the gold priority queue:
The following command maps the ef DSCP to the gold priority queue: