Cisco Cisco Tunnel Terminating Gateway (TTG) Guide De Dépannage
Global Configuration Mode Commands
require active-charging ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Enables the Category-based Content Filtering application with ACS support and creates the necessary Static
Rating Database (SRDB) tasks to utilize the internal database of static/dynamic URLs.
For Dynamic Content Filtering support, the
Rating Database (SRDB) tasks to utilize the internal database of static/dynamic URLs.
For Dynamic Content Filtering support, the
keyword must be configured to
specify that the Dynamic Rater Package (model and feature files) must be distributed to rating modules on
startup, recovery, etc. If not configured, by default, the static-only mode is enabled.
startup, recovery, etc. If not configured, by default, the static-only mode is enabled.
Usage
Use this command to enable/disable ACS with or without Category-based Content Filtering application on a
system.
In Release 8.0 and 8.1, this command must be configured before configuring any services. This is to ensure
that the resource subsystem can appropriately reserve adequate memory for ACS Manager tasks. If this
command is configured after all the Session Manager tasks are already active, the ACS Manager tasks will
not be started even if additional cards are added to the chassis—instead, the chassis must be rebooted.
system.
In Release 8.0 and 8.1, this command must be configured before configuring any services. This is to ensure
that the resource subsystem can appropriately reserve adequate memory for ACS Manager tasks. If this
command is configured after all the Session Manager tasks are already active, the ACS Manager tasks will
not be started even if additional cards are added to the chassis—instead, the chassis must be rebooted.
Example
In Release 8.0, the following command enables resource subsystem to configure ACS in isolated mode:
In Release 8.0, the following command enables resource subsystem to configure ACS in isolated mode:
In Release 8.1, the following command enables ACS in Optimized mode:
In Release 8.3, the following command enables ACS in Optimized mode: