Cisco Cisco Packet Data Gateway (PDG) Manuel De Maintenance

Page de 914
  G-CDR and Enhanced G-CDR  Field Reference Tables 
CDR Fields Supported in eG-CDRs  ▀   
Cisco ASR 5000 Series AAA Interface Administration and Reference  ▄  
 
  OL-22955-01 
Field
 
Category
 
Description
 
Charging 
Characteristics 
Selection Mode 
Holds information about how Charging Characteristics were selected. 
SGSN PLMN 
Identifier 
SGSN PLMN Identifier (MCC and MNC) used during this record. 
Served IMEISV 
IMEISV of the ME, if available. 
RAT Type 
This field indicates the Radio Access Technology (RAT) type currently used by the Mobile 
Station as defined in TS 29.060. The field is present in the G-CDR if provided by SGSN. 
MS Time Zone 
This field contains the MS Time Zone the MS is currently located as defined in TS 29.060, if 
provided by SGSN. 
User Location 
Information 
This field contains the User Location Information of the MS as defined in TS 29.060, if 
provided by SGSN. 
List of Service Data 
Volumes 
A list of the changes that occurred in charging conditions for all service data flows for the 
PDP context. 
 
 
List of Traffic Data Volumes 
List of Traffic Data Volumes
 
QoS Requested (not in G-CDR) 
N/A 
 
QoS Negotiated 
QoS Negotiated indicates the applied QoS accepted by the network. 
Data Volume Uplink 
Number of octets in uplink direction. 
Data Volume Downlink 
Number of octets in downlink direction. 
Change Condition 
The change condition that resulted in this LOTV container. 
Change Time 
Timestamp at change. 
Failurehandling Continue (only in e-GCDRs)  O 
Boolean indicating offline charging enabled. 
UserLocationInformation 
This field contains the User Location Information of the MS. 
 
Notes: 
 
  LOTV related changes: 
  A new IE is included for LOTV container i.e. User location information. 
  The list of traffic data volumes now supports RAI and CGI/SAI changes, i.e. whenever RAI and/or 
CGI/SAI changes are detected; it will result in a ―List of Traffic Data Volumes‖ container being added 
to the CDR, if location reporting is required and a report of CGI/SAI change is received.