Cisco Cisco AP541N Wireless Access Point Manuel De Maintenance
Status
Traffic Statistics
26
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
2
Table 4
Traffic Statistics Description
Field
Description
Network Interfaces
The name of the Ethernet or VAP interfaces.
Status
Shows whether the interface is up or down.
MAC Address
MAC address for the specified interface. Each VAP
interface has a unique MAC address.
interface has a unique MAC address.
VLAN ID
A virtual LAN (VLAN) ID is used to establish multiple
networks on the same access point. The VLAN ID is
configured on the Wireless > VAP tab. (See
networks on the same access point. The VLAN ID is
configured on the Wireless > VAP tab. (See
.)
Name (SSID)
The network name, also known as the SSID, is an
alphanumeric key that uniquely identifies a VAP. The
name (SSID) is configured on the VAP tab. (See
alphanumeric key that uniquely identifies a VAP. The
name (SSID) is configured on the VAP tab. (See
.) NA means either that
the entry is not applicable or is not supported.
Transmit and Receive Information
Total Packets
Indicates total packets sent (in Transmit table) or
received (in Received table) on that interface.
received (in Received table) on that interface.
Total Bytes
Indicates total bytes sent (in Transmit table) or
received (in Received table) on that interface.
received (in Received table) on that interface.
Total Dropped Packets
Indicates total number of packets sent (in Transmit
table) or received (in Received table) on that interface
that were dropped. NA means that the drop and error
counters for the VAP interfaces and the WDS
interfaces are not supported.
table) or received (in Received table) on that interface
that were dropped. NA means that the drop and error
counters for the VAP interfaces and the WDS
interfaces are not supported.
Total Dropped Bytes
Indicates total number of bytes sent (in Transmit table)
or received (in Received table) on that interface that
were dropped. NA means that the drop and error
counters for the VAP interfaces and the WDS
interfaces are not supported.
or received (in Received table) on that interface that
were dropped. NA means that the drop and error
counters for the VAP interfaces and the WDS
interfaces are not supported.
Errors
Displays the total number of transmit and receive
errors detected by the AP. NA means that the drop and
error counters for the VAP interfaces and the WDS
interfaces are not supported.
errors detected by the AP. NA means that the drop and
error counters for the VAP interfaces and the WDS
interfaces are not supported.