Cisco Cisco AP541N Wireless Access Point Manuel De Maintenance

Configuring the Web Server Settings

133

Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide

Click Apply to apply the changes and to save the settings. If you disable the 
protocol you are currently using to access the access point management interface, 
the current connection will end and you will not be able to access the access point 
by using that protocol until it is enabled.

Enable or disable access through a Secure HTTP Server 
(HTTPS). This setting is independent of the HTTP server status 
setting.

Enable or disable access through HTTP. This setting is 
independent of the HTTPS server status setting.

Specify the port number for HTTP traffic. (The default is 80.)

Specify the maximum number of HTTP and HTTPS 
connections permitted to the access point Web server that are 
allowed at the same time. The permitted range is 1–10. The 
number you enter affects the number of connections to the 
access point Configuration Utility. It has no impact on the 
number of wireless clients allowed to associate with the 
access point.

Enter the number of minutes a HTTP or HTTPS session remains 
idle before the session is terminated. The valid range is 1–1440 
minutes (24 hours).

Select this option to generate a new SSL certificate for the 
secure Web server. This should be done once the access point 
has an IP address to ensure that the common name for the 
certificate matches the IP address of the access point. 
Generating a new SSL certificate restarts the secure Web 
server. The secure connection will not work until the new 
certificate is accepted on the browser.