Cisco Cisco Packet Data Interworking Function (PDIF)
VLANs
VLAN-Related CLI Commands ▀
ASR 5500 System Administration Guide, StarOS Release 16 ▄
269
CLI Mode
Command
Description
Subscriber
Configuration
Mode
Configuration
Mode
ip vlan <vlan_id>
Configures the subscriber VLAN ID that is used with the
assigned address for the subscriber session to receive packets. If
the IP pool from which the address is assigned is configured
with a VLAN ID, this subscriber configured VLAN ID
overrides it.
assigned address for the subscriber session to receive packets. If
the IP pool from which the address is assigned is configured
with a VLAN ID, this subscriber configured VLAN ID
overrides it.
VLAN
Configuration
Mode
Configuration
Mode
bind interface <interface_name>
<context_name>
Binds a virtual interface and context to support VLAN service.
VLAN
Configuration
Mode
Configuration
Mode
[no] ingress-mode
Enables or disables port ingress incoming) mode.
VLAN
Configuration
Mode
Configuration
Mode
priority <value>
Configures an 802.1p VLAN priority bit for ASN-GW service
only.
only.
VLAN
Configuration
Mode
Configuration
Mode
[no] shutdown
Enables or disables traffic over the current VLAN.
VLAN
Configuration
Mode
Configuration
Mode
vlan-map interface <if_name>
<context_name>
Associates an IP interface having a VLAN ID with a context.
Table 36.
VLAN-Related Monitoring Commands
CLI Mode
Command
Description
Exec Mode show
commands
commands
clear port <slot/port> vlan <vlan_id>
Clears NPU statistics for the port that has a previously
configured VLAN ID.
configured VLAN ID.
Exec Mode show
commands
commands
show logical-port utilization table vlan { 5-
minute | hourly }
minute | hourly }
Displays VLAN utilization for a specified collection
interval.
interval.
Exec Mode show
commands
commands
show port info <slot/port> vlan <vlan_id>
Displays NPU counters for a previously configured
VLAN ID.
VLAN ID.