Cisco Cisco Packet Data Interworking Function (PDIF)
VLANs
VLAN-Related CLI Commands ▀
ASR 5000 System Administration Guide, StarOS Release 16 ▄
295
CLI Mode
Command
Description
Subscriber
Configuration
Mode
Configuration
Mode
ip vlan
<vlan_id>
Configures the subscriber VLAN ID that is used with the
assigned address for the subscriber session to receive
packets. If the IP pool from which the address is assigned is
configured with a VLAN ID, this subscriber configured
VLAN ID overrides it.
assigned address for the subscriber session to receive
packets. If the IP pool from which the address is assigned is
configured with a VLAN ID, this subscriber configured
VLAN ID overrides it.
VLAN
Configuration
Mode
Configuration
Mode
bind interface
<interface_name>
<context_name>
Binds a virtual interface and context to support VLAN
service.
service.
VLAN
Configuration
Mode
Configuration
Mode
[no] ingress-mode
Enables or disables port ingress incoming) mode.
VLAN
Configuration
Mode
Configuration
Mode
priority
<value>
Configures an 802.1p VLAN priority bit for ASN-GW
service only.
service only.
VLAN
Configuration
Mode
Configuration
Mode
[no] shutdown
Enables or disables traffic over the current VLAN.
VLAN
Configuration
Mode
Configuration
Mode
vlan-map interface
<if_name>
<context_name>
Associates an IP interface having a VLAN ID with a
context.
context.
Table 39.
VLAN-Related Monitoring Commands
CLI Mode
Command
Description
Exec
Mode
Mode
clear port
<slot/port>
vlan
<vlan_id>
Clears NPU statistics for the port that has a previously
configured VLAN ID.
configured VLAN ID.
Exec
Mode
Mode
show logical-port utilization table vlan {5-
minute|hourly}
minute|hourly}
Displays VLAN utilization for a specified collection
interval.
interval.
Exec
Mode
Mode
show port info
<slot/port>
vlan
<vlan_id>
Displays NPU counters for a previously configured
VLAN ID.
VLAN ID.