Cisco Cisco Packet Data Gateway (PDG)
Usage Guidelines
Use this command to configure IuCS-over-ATM support. This association of ALCAP protocol service
configuration in HNB-CS network instance provides multiplexing of different users onto one AAL2 transmission
path using channel IDs (CIDs).
configuration in HNB-CS network instance provides multiplexing of different users onto one AAL2 transmission
path using channel IDs (CIDs).
If this CLI is not configured any RAB-ASST-REQ message requesting AAL2 connection setup shall be
rejected with an appropriate cause.
rejected with an appropriate cause.
Caution
This command must not be used more than once to configure IuCS-over-ATM support.
Important
Examples
Following command associates ALCAP service alcap_svc1 configured in context named Ctx_alcap1 with
specific HNB-CS network instance:
associate alcap-service alcap_svc1context ctx_alcap1
specific HNB-CS network instance:
associate alcap-service alcap_svc1context ctx_alcap1
Command Line Interface Reference, Modes G - H, StarOS Release 19
1464
HNB-CS Network Configuration Mode Commands
associate alcap-service