Cisco Cisco Packet Data Gateway (PDG)
default diameter accounting { dictionary | hd-mode | max-retries | max-transmissions | request-timeout
}
}
dictionary: Sets the context's dictionary to the default.
hd-mode:Sends records to the Diameter server, if all Diameter servers are down or unreachable, then copies
records to the local HDD and periodically retries the Diameter server.
records to the local HDD and periodically retries the Diameter server.
max-retries:0 (disabled)
max-transmissions:0 (disabled)
request-timeout:20 seconds
dictionary { aaa-custom1 | aaa-custom10 | aaa-custom2 | aaa-custom3 | aaa-custom4 | aaa-custom5 |
aaa-custom6 | aaa-custom7 | aaa-custom8 | aaa-custom9 | dynamic-load | nasreq | rf-plus }
aaa-custom6 | aaa-custom7 | aaa-custom8 | aaa-custom9 | dynamic-load | nasreq | rf-plus }
Specifies the Diameter accounting dictionary.
aaa-custom1 ... aaa-custom10:Configures the custom dictionaries. Even though the CLI syntax supports
several custom dictionaries, not necessarily all of them have been defined. If a custom dictionary that has not
been implemented is selected, the default dictionary will be used.
several custom dictionaries, not necessarily all of them have been defined. If a custom dictionary that has not
been implemented is selected, the default dictionary will be used.
dynamic-load:Configures the dynamically loaded Diameter dictionary. The dictionary name must be an
alphanumeric string of 1 through 15 characters.For more information on dynamic loading of Diameter
dictionaries, see the diameter dynamic-dictionary in the Global Configuration Mode Commands chapter of
this guide.
alphanumeric string of 1 through 15 characters.For more information on dynamic loading of Diameter
dictionaries, see the diameter dynamic-dictionary in the Global Configuration Mode Commands chapter of
this guide.
nasreq: nasreq dictionary—the dictionary defined by RFC 3588.
rf-plus:RF Plus dictionary.
endpoint endpoint_name
Enables Diameter to be used for accounting, and specifies which Diameter endpoint to use.
endpoint_name is an alphanumeric string of 1 through 63 characters.
hd-mode fall-back-to-local
Specifies that records be copied to the local HDD if the Diameter server is down or unreachable. CDF/CGF
will pull the records through SFTP.
will pull the records through SFTP.
hd-storage-policy hd_policy
Specifies the HD Storage policy name.
hd_policy must be the name of a configured HD Storage policy, expressed as an alphanumeric string of 1
through 63 characters.
through 63 characters.
HD storage policies are configured through the Global Configuration Mode.
This and the hd-mode command are used to enable the storage of Rf Diameter Messages to HDD incase all
Diameter Servers are down or unreachable.
Diameter Servers are down or unreachable.
max-retries max_retries
Specifies how many times a Diameter request should be retried with the same server, if the server fails to
respond to a request.
respond to a request.
Command Line Interface Reference, Modes C - D, StarOS Release 19
542
Context Configuration Mode Commands A-D
diameter accounting