Cisco Cisco Packet Data Interworking Function (PDIF)
max-tunnel-challenge-length
Sets the maximum length of the tunnel challenge in bytes.The challenge is used for tunnel authentication
purposes during tunnel creation.
purposes during tunnel creation.
Product
GGSN
PDSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > LAC Service Configuration
configure > context context_name > lac-service service_name
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-lac-service)#
Syntax Description
max-tunnel-challenge-length bytes
bytes
Default: 16
Specifies the maximum length (in bytes of the tunnel challenge. This must be an integer from 4 through 32.
Usage Guidelines
Use this command to set the maximum length (in bytes) for the tunnel challenge that is used during tunnel
creation.
creation.
Examples
The following command sets the maximum length of the tunnel challenge to 32 bytes:
max-tunnel-challenge-length 32
max-tunnel-challenge-length 32
Command Line Interface Reference, Modes I - Q, StarOS Release 19
388
LAC Service Configuration Mode Commands
max-tunnel-challenge-length