Cisco Cisco Packet Data Interworking Function (PDIF)
show bssap+ statistics
Displays Base Station system Application Part (BSSAP+) protocol statistics for the Gs interface between the
SGSN and the Mobile services Switching Centre, Visitor Location Register (MSC/VLR).
SGSN and the Mobile services Switching Centre, Visitor Location Register (MSC/VLR).
Product
SGSN
Privilege
Inspector
Command Modes
Exec
The following prompt is displayed in the Exec mode:
[local]
host_name
#
Syntax Description
show bssap+ statistics [ gs-service gs_svc_name ] [ vlr { isdn-number ISDN_Num| name vlr_name } ] [
verbose ] [ | { grep grep_options | more } ]
verbose ] [ | { grep grep_options | more } ]
gs-service gs_svc_name
Specifies the name of a specific Gs service to filter the BSSAP+ information as an alphanumeric string of 1
through 63 characters that is case sensitive.
through 63 characters that is case sensitive.
vlr { isdn-number ISDN_Num| name vlr_name
Identifies a specific VLR (by name or ISDN number) to filter BSSAP+ information.
vlr_name is the configured name of the VLR expressed.
VLR_num is the configured E.164-type ISDN number for the VLR. Enter a numerical string of 1 to 15 digits.
verbose
Indicates the output should provide as much information as possible. If this option is not specified then the
output will be limited to a concise summary.
output will be limited to a concise summary.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
the output of this command will be sent.
For details on the usage of grep and more, refer to the Regulating a Command's Output section of the Command
Line Interface Overview chapter.
Line Interface Overview chapter.
Command Line Interface Reference, Modes E - F, StarOS Release 19
921
Exec Mode show Commands (A-C)
show bssap+ statistics