Cisco Cisco ASR 5000

Page de 9109
  ACS Charging Action Configuration Mode Commands 
deactivate-predefined-rule  ▀   
 
Command Line Interface Reference, StarOS Release 18  ▄  
 
   
403 
deactivate-predefined-rule 
This command allows you to configure the predefined rule to ensure one time redirection after applying the charging-
action. 
Product
 
GGSN, P-GW 
Privilege
 
Security Administrator, Administrator 
Mode
 
Exec > ACS Configuration > Charging Action Configuration 
active-charging service service_name > charging-action charging_action_name
 
Entering the above command sequence results in the following prompt: 
[local]host_name(config-charging-action)# 
Syntax
 
[ default | no ] deactivate-predefined-rule 
default
 
Configures this command with its default setting. 
Default: Disabled; same as 
no deactivate-predefined-rule
 
no
 
If previously enabled, disables the predefined rule in the current charging action. 
Usage 
Use this command to ensure that the predefined rule gets deactivated after applying the charging-action when 
configured. By default, the configuration is disabled. 
This feature is added in the ECSv2 to redirect traffic when quota for a user expires. When quota expires, 
PCRF will install a rule for the redirection. In the charging-action for this redirection rule, an action to disable 
the same rule will ensure one time redirection. A charging-rule-report will be sent to PCRF indicating the 
PCC Rule Status as INACTIVE for the deactivated rule. Rule-Failure-Code sent is 
RESOURCE_ALLOCATION_FAILURE. 
The deactivation will apply only for predefined rules. If a static rule or a predefined group-of-ruledef is 
associated with the charging-action, it will not be deactivated.