Cisco Cisco ASR 5000
Exec Mode show Commands (M-P)
show mipha ▀
Command Line Interface Reference, StarOS Release 18 ▄
4773
callid
call_id
: Displays information only for calls with the call ID specified as a 4-byte hexadecimal
number.
imsi
imsi_num
: Specifies an IMSI (international mobile subscriber ID) for which information is to be
displayed. The IMSI is a 15-character field which identifies the subscriber’s home country and carrier.
ip-address
ip_addr
: Displays statistics for a call with the IP address specified in IPv4 dotted-decimal
notation.
msid
msid_num
: Specifies a mobile subscriber ID only for which information is to be displayed.
ms_id
must
be from 7 to 16 digits specified as an IMSI, MIN, or RMI.
peer-address
peer_address
: Displays statistical information for the peer IP address specified using IPv4
dotted-decimal notation.
reverse-tunnel
{
on
|
off
}: Enables the display of reverse IP tunnel information.
username
user_name
: Displays user MIP call information for the username specified as an alphanumeric
string of 1 through 127 characters including wildcard characters ($ and *).
peer-address [ operator ] peer_address
In conjunction with
mipha [ summary ] peer-address
keyword, indicates a range of peers is to be
displayed.
peer_address
must be specified using IPv4 dotted-decimal notation.
operator
implies how to logically specify a range of peer-addresses and it must be one of the following:
<
: IP address is less than the specified
peer_address
>
: IP address is greater than the specified
peer_address
greater-than
: IP address is greater than the specified
peer_address
less-than
: IP address is less than the specified
peer_address
statistics [ ha-service ha_name | peer-address peer_address ]
Displays statistical information for the home agent service specified by its name (an alphanumeric string of 1
through 63 characters) or peer IP address (IPv4 notation).
through 63 characters) or peer IP address (IPv4 notation).
peers ha-service service_name
[ current-sessions { { > | greater-than } sessions
[ < sessions ] | { < | less-than } sessions [ > sessions ] | sessions } ] [ peer-
address address ]
address address ]
Displays peer servers for the specified HA service.
ha-service
service_name
: Specifies the name of an existing HA service for which the associated peer
servers are to be displayed as an alphanumeric string of 1 through 63 characters.
current-sessions
: Displays only peer servers with current sessions meeting the following criteria:
> | greater-than
sessions
: Displays only peer servers currently running sessions higher than the value
entered in this parameter.
sessions
must be an integer from 1 to 3000000. Note: the keyword
“
greater-than
” and the “
>
” symbol are interchangeable in this instance of the command.
<
sessions
: Displays only peer servers that are currently running sessions higher than the
greater-
than
parameter but less than the value entered in this parameter.
sessions
must be an integer from
1 to 3000000.
< | less-than
sessions
: Displays only peer servers currently running sessions lower than the value
entered in this parameter.
sessions
must be an integer from 1 to 3000000. Note: the keyword
“
less-than
” and the “
<
” symbol are interchangeable in this instance of the command.
>
sessions
: Displays only peer servers that are currently running sessions lower than the
less-than
permitter but more than the value entered in this parameter.
sessions
must be an integer from 1 to
3000000.