Cisco Cisco ASR 5000
GTPC Load Control Profile Configuration Mode Commands
▀ threshold
▄ Command Line Interface Reference, StarOS Release 18
6126
threshold
Configures the minimum threshold value above which PGW-provided GTP-C load control information should be
utilized for calculating the PGW effective weight during initial node selection.
utilized for calculating the PGW effective weight during initial node selection.
Important:
GTP-C Load Control Profile is a license-controlled feature. For more information, contact your
Cisco account or support representative.
Product
P-GW
S-GW
SAEGW
Privilege
Administrator, Security Administrator
Mode
Exec > Global Configuration > GTPC Load Control Profile Configuration
configure > gtpc-load-control-profile
profile_name
Entering the above command results in the following prompt:
[local]host_name(config-gtpc-load-control-profile)#
Syntax
threshold percentage
[ no ] threshold
threshold
Enables the configuration of the minimum threshold value above which PGW-provided load control
information should be utilized for calculating the P-GW effective weight during initial node selection.
information should be utilized for calculating the P-GW effective weight during initial node selection.
percentage
Enter the threshold setting as a percentage of 100%. The entry must be an integer from 1 to 100. The default
setting is 50%.
setting is 50%.
no
Disables the configured threshold setting.
Usage
Use this command to configure the minimum threshold value above which PGW-provided load control
information should be utilized for calculating the P-GW effective weight during initial node selection.
The Load Control Profile must be associated with a P-GW, S-GW, or SAEGW service using one of the
following commands:
information should be utilized for calculating the P-GW effective weight during initial node selection.
The Load Control Profile must be associated with a P-GW, S-GW, or SAEGW service using one of the
following commands:
P-GW:
associate
command in P-GW Service Configuration Mode