Cisco Cisco ASR 5000
LAC Service Configuration Mode Commands
▀ max-tunnel-challenge-length
▄ Command Line Interface Reference, StarOS Release 18
6902
max-tunnel-challenge-length
Sets the maximum length of the tunnel challenge in bytes.The challenge is used for tunnel authentication purposes
during tunnel creation.
during tunnel creation.
Product
GGSN
PDSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > LAC Service Configuration
configure > context context_name > lac-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-lac-service)#
Syntax
max-tunnel-challenge-length bytes
bytes
Default: 16
Specifies the maximum length (in bytes of the tunnel challenge. This must be an integer from 4 through 32.
Specifies the maximum length (in bytes of the tunnel challenge. This must be an integer from 4 through 32.
Usage
Use this command to set the maximum length (in bytes) for the tunnel challenge that is used during tunnel
creation.
creation.
Example
The following command sets the maximum length of the tunnel challenge to
32
bytes:
max-tunnel-challenge-length 32