Cisco Cisco ASR 5000
LTE Paging Profile Configuration Mode Commands
paging-stage ▀
Command Line Interface Reference, StarOS Release 18 ▄
7145
t3413-timeout seconds
Defines the time-interval in seconds between paging requests. The MME uses this timer for retransmission of
an S1 Paging request to UE for PS paging.
an S1 Paging request to UE for PS paging.
timeout
must be a value from 0 through 20.
CS triggered S1 Paging requests are transmitted only once by the MME (no retransmission). For a CS paging
to be sent again, another SGs paging request needs to be sent by MSC/VLR towards MME.
to be sent again, another SGs paging request needs to be sent by MSC/VLR towards MME.
max-paging-attempts attempts
Defines the number of paging requests to be sent out during this paging-stage.
attempts
must be a value from 0 through 5.
Usage
Use this command to configure paging procedure stages, which in turn control the pace, volume, and
behavior of paging for each stage.
behavior of paging for each stage.
Related Commands
Refer to the
paging-map
command in the LTE Policy Configuration Commands chapter to assign a priority for this
paging profile based on traffic type.