Cisco Cisco ASR 5000
Call Control Profile Configuration Mode
▀ local-cause-code-mapping path-failure
▄ Command Line Interface Reference, StarOS Release 18
2020
local-cause-code-mapping path-failure
Configures SM cause codes for SGSN to send in Deactivate PDP Request.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
local-cause-code-mapping path-failure sm-cause-code { insufficient-resources | network-
failure | reactivation-requested | regular-deactivation }
failure | reactivation-requested | regular-deactivation }
remove local-cause-code-mapping path-failure
remove
Erases defined cause code configuration.
sm-cause-code
Defines the SM cause code to replace the default cause code sent in a Deactivate PDP Request message when
a GTP-C path failure occurs. Options include:
a GTP-C path failure occurs. Options include:
insufficient-resources
network-failure
reactivation-requested
regular-deactivation
Usage
This command is part of the Cause Code Mapping feature, documented in the SGSN Administration Guide,
that provides the operator with the option to configure preferred cause codes to be sent in error or failure
messages to the UE.
that provides the operator with the option to configure preferred cause codes to be sent in error or failure
messages to the UE.
Example
Use the following command to replace the default cause code with SM cause
network-failure
:
local-cause-code-mapping path-failure sm-cause-code network-failure