Cisco Cisco ASR 5000
Exec Mode Commands (A-C)
clear diameter route ▀
Command Line Interface Reference, StarOS Release 18 ▄
3881
facility { aaamgr | sessmgr } [ instance instance_number ]
Clears the dynamic routes for the specified facility – AAA Manager or Session Manager.
Specify the instance number to clear the dynamic routes for a particular facility’s instance. The
Specify the instance number to clear the dynamic routes for a particular facility’s instance. The
instance_number
must be an integer from 1 through 99999.
| { grep grep_options | more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to clear the Diameter routing tables that gets added in the system whenever messages are
routed through the Diameter proxy/Diabase. These message remain in the system for a long period.
The user has the flexibility to clear the route based on any combination of these keyword options. Running
the command
routed through the Diameter proxy/Diabase. These message remain in the system for a long period.
The user has the flexibility to clear the route based on any combination of these keyword options. Running
the command
clear diameter route dynamic endpoint endpoint-name peer peer-name
will
result in flushing of the routes that match both endpoint and peer value. Similarly, with this CLI command
"
"
clear diameter route dynamic endpoint endpoint-name peer peer-name facility {
aaamgr | sessmgr } instance instance_number
, the routes in a particular facility with the specified
endpoint and peer name can be deleted.
Example
The following command clears all dynamic Diameter routes for the specified peer:
clear diameter route dynamic peer p1