Cisco Cisco ASR 5000
Global Configuration Mode Commands (L-S)
▀ network-overload-protection mme-new-connections-per-second
▄ Command Line Interface Reference, StarOS Release 18
5464
network-overload-protection mme-new-connections-per-second
This command configures an attach rate throttle mechanism to control the number of new connections allowed on a per
second basis.
second basis.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
network-overload-protection mme-new-connections-per-second #_new_connections action
attach { drop | reject-with-emm-cause { congestion | network-failure | no-suitable-cell-
in-tracking-area } } tau { drop | reject-with-emm-cause { congestion | network-failure |
no-sec-ctxt-in-nw | no-suitable-cell-in-tracking-area } } fwd-reloc { drop | reject } ddn
{ drop | reject-with-cause { unable-to-page-ue | context-not-found } } [ queue-size
queue_size ] [ wait-time wait_time ]
attach { drop | reject-with-emm-cause { congestion | network-failure | no-suitable-cell-
in-tracking-area } } tau { drop | reject-with-emm-cause { congestion | network-failure |
no-sec-ctxt-in-nw | no-suitable-cell-in-tracking-area } } fwd-reloc { drop | reject } ddn
{ drop | reject-with-cause { unable-to-page-ue | context-not-found } } [ queue-size
queue_size ] [ wait-time wait_time ]
default network-overload-protection mme-new-connections-per-second
default
Disables the MME attach rate throttle feature.
mme-new-connections-per-second #_new_connections
Define the number of new connections to be accepted per second.
#_new_connections:
Must be an integer from 50 to 5000.
action
Specifies the action to be taken by the MME when the new connection queue is full. Specific actions can be
defined for each of the following connection types:
defined for each of the following connection types:
UE-initated attaches (see
attach
keyword).
UE-initatied inter-CN node TAU requests (see
tau
keyword).
Peer SGSN/MME intiated forward relocation requests (see
fwd-reloc
keyword).
attach { drop | reject-with-emm-cause { congestion | network-failure | no-
suitable-cell-in-tracking-area } }
suitable-cell-in-tracking-area } }
Specifies the action to be taken for all types of UE-initiated initial attaches (IMSI, local GUTI, foreign GUTI,
mapped GUTI, etc.). Select one of the following actions:
mapped GUTI, etc.). Select one of the following actions: