Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands E-H
gtpp attribute ▀
Command Line Interface Reference, StarOS Release 18 ▄
2457
| dynamic-flag-extension | furnish-charging-information | imei | imsi-unauthenticated-
flag | lapi | local-record-sequence-number | losdv | ms-timezone | msisdn | node-id |
pdn-connection-id | pdp-address | pdp-type | pgw-ipv6-addr | pgw-plmn-id | plmn-id | qos
| rat | recordextension | record-extensions rat | record-type | served-mnai | served-pdp-
pdn-address-extension | served-pdp-pdn-address-prefix-length | sgsn-change | sgw-ipv6-
addr | served-mnai | sms { destination-number | recording-entity | service-centre }|
sna-ipv6-addr | sponsor-id | start-time | stop-time | twanuli | uli | user-csg-
information }
flag | lapi | local-record-sequence-number | losdv | ms-timezone | msisdn | node-id |
pdn-connection-id | pdp-address | pdp-type | pgw-ipv6-addr | pgw-plmn-id | plmn-id | qos
| rat | recordextension | record-extensions rat | record-type | served-mnai | served-pdp-
pdn-address-extension | served-pdp-pdn-address-prefix-length | sgsn-change | sgw-ipv6-
addr | served-mnai | sms { destination-number | recording-entity | service-centre }|
sna-ipv6-addr | sponsor-id | start-time | stop-time | twanuli | uli | user-csg-
information }
default
Sets the default GTPP attributes in the generated CDRs. It also sets the default presentation of attribute values
in generated CDRs.
in generated CDRs.
no
Removes the configured GTPP attributes from the CDRs.
apn-ambr [ include-for-all-bearers | include-for-default-bearer | include-for-
non-gbr-bearers ]
non-gbr-bearers ]
Default: Disabled
This keyword controls the inclusion of the optional field “apn-ambr” in the PGW-CDRs in the custom24
GTPP dictionary.
This keyword controls the inclusion of the optional field “apn-ambr” in the PGW-CDRs in the custom24
GTPP dictionary.
Important:
This keyword option will be available only if a valid license is installed. For more information,
contact your Cisco account representative.
The APN Aggregate Maximum Bit Rate (AMBR) is a subscription parameter stored per APN. It limits the
aggregate bit rate that can be expected to be provided across all non-GBR bearers and across all PDN
connections of the same APN. Each of these non-GBR bearers potentially utilize the entire APN AMBR, e.g.
when the other non-GBR bearers do not carry any traffic. The APN AMBR is present as part of QoS
information.
In 15.0 and later releases, this CLI command should be configured along with the following additional
options to support APN-AMBR reporting in SGW-CDRs in all GTPP dictionaries.
aggregate bit rate that can be expected to be provided across all non-GBR bearers and across all PDN
connections of the same APN. Each of these non-GBR bearers potentially utilize the entire APN AMBR, e.g.
when the other non-GBR bearers do not carry any traffic. The APN AMBR is present as part of QoS
information.
In 15.0 and later releases, this CLI command should be configured along with the following additional
options to support APN-AMBR reporting in SGW-CDRs in all GTPP dictionaries.
include-for-all-bearers
: Includes the APN-AMBR information in SGW-CDRs for all bearers
(GBR and NON-GBR)
include-for-default-bearer
: Includes APN-AMBR information in SGW-CDRs only for default
bearer.
include-for-non-gbr-bearers
: Includes APN-AMBR information for non-gbr-bearers.
This feature is required to enable post-processing of CDRs to verify MVNO subscribers actual QoS against
invoicing systems.
invoicing systems.
Important:
This CLI command and the associated options are not available for products other than S-GW and P-
GW. The option “
non-gbr-bearers-only
” is available in S-GW and P-GW but the other options are available in S-
GW only.
In the P-GW implementation, if the CLI command “
gtpp attribute apn-ambr
” is configured, it will be
treated as “
gtpp attribute apn-ambr non-gbr-bearers-only
”. In case of S-GW/P-GW combo if
any of the options is configured, it will be considered that the attribute is available.