Cisco Cisco Packet Data Interworking Function (PDIF)
LTE TAI Management Object Configuration Mode Commands
rai ▀
Command Line Interface Reference, StarOS Release 18 ▄
7205
rai
Configures a Routing Area Identifier (RAI) for an associated S-GW for this TAI management object.
Product
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > LTE TAI Management Database Configuration > LTE TAI
Management Object Configuration
Management Object Configuration
configure > lte-policy > tai-mgmt-db db_name > tai-mgmt-obj obj_name
Entering the above command sequence results in the following prompt:
[local]host_name(tai-mgmt-obj)#
Syntax
rai mcc number mnc number lac area_code rac rac_value
no rai
no
Removes a configured LAI from the TAI management object.
mcc number
Specifies the mobile country code (MCC) portion of a PLMN identifier as an integer from 100 through 999.
mnc number
Specifies the mobile network code (MNC) portion of a PLMN identifier as a 2- or 3-digit integer from 00
through 999.
through 999.
lac area_code
Specifies the Location Area Code portion of the TAI as an integer from 1 through 65535.
rac
Specifies the Routing Area Code portion of the TAI as an integer from 1 to 255.
Usage
On the S4-SGSN, use this command as part of the configuration of the selection of an SGW for RAI on the
S4-SGSN for operators wishing to bypass the DNS resolution of RAI FQDN for obtaining the SGW address.
Once the RAI is configured, the SGW address that serves this RAI must be configured with the
S4-SGSN for operators wishing to bypass the DNS resolution of RAI FQDN for obtaining the SGW address.
Once the RAI is configured, the SGW address that serves this RAI must be configured with the
sgw-
address
command. For details on this command, refer to the description of
sgw-address
in this chapter.
Example