Cisco Cisco ASR 5700
APN Configuration Mode Commands
secondary ip pool ▀
Command Line Interface Reference, StarOS Release 17 ▄
1445
secondary ip pool
This command specifies a secondary IP pool to be used as backup pool for Network Address Translation (NAT).
Important:
This command is license dependent. For more information please contact your Cisco account
representative.
Product
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
secondary ip pool pool_name
no secondary ip pool
no
Removes the previous secondary IP pool configuration.
pool_name
Specifies the secondary IP pool name.
pool_name
must be an alphanumeric string of 1 through 31 characters.
Usage
Use this command to configure a secondary IP pool for NAT subscribers, which is not overwritten by the
RADIUS supplied list. The secondary pool configured will be appended to the RADIUS supplied IP pool list
/ APN provided IP pool list whichever is applicable during call setup.
RADIUS supplied list. The secondary pool configured will be appended to the RADIUS supplied IP pool list
/ APN provided IP pool list whichever is applicable during call setup.
Example
The following command configures a secondary IP pool named
test123
:
secondary ip pool test123