Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
attach access-type ▀
Command Line Interface Reference, StarOS Release 17 ▄
1901
location-area-list instance
list_id
Instructs the SGSN to apply the command action to a specific location area list. Location area lists should
already have been created with the
already have been created with the
location-area-list
command. The location area list consists of one
or more LACs, location area codes, where the MS is when placing the call.
Using this keyword with either the
Using this keyword with either the
allow
or
restrict
keywords enables you to configure with more
granularity.
list_id
: Enter an integer between 1 and 5.
failure-code code
Specify a GMM failure cause code to identify the reason an attach did not occur. This GMM cause code will
be sent in the reject message to the MS.
Default: 14.
be sent in the reject message to the MS.
Default: 14.
fail-code
: Enter an integer from 2 to 111. Refer to the GMM failure cause codes listed below (from section
10.5.5.14 of the 3GPP TS 124.008 v7.2.0 R7):
2 - IMSI unknown in HLR
3 - Illegal MS
6 - Illegal ME
7 - GPRS services not allowed
8 - GPRS services and non-GPRS services not allowed
9 - MSID cannot be derived by the network
10 - Implicitly detached
11 - PLMN not allowed
12 - Location Area not allowed
13 - Roaming not allowed in this location area
14 - GPRS services not allowed in this PLMN
15 - No Suitable Cells In Location Area
16 -MSC temporarily not reachable
17 - Network failure
20 - MAC failure
21 - Synch failure
22 - Congestion
23 - GSM authentication unacceptable
40 - No PDP context activated
48 to 63 - retry upon entry into a new cell
95 - Semantically incorrect message
96 - Invalid mandatory information
97 - Message type non-existent or not implemented
98 - Message type not compatible with state
99 - Information element non-existent or not implemented
100 - Conditional IE error