Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
local-cause-code-mapping restricted-zone-code ▀
Command Line Interface Reference, StarOS Release 17 ▄
2001
local-cause-code-mapping restricted-zone-code
Configures the reject cause code to send to a UE when a UE requests access to a restricted zone.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
local-cause-code-mapping restricted-zone-code emm-cause-code { eps-service-not-allowed-
in-this-plmn | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
in-this-plmn | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
remove local-cause-code-mapping restricted-zone-code
remove local-cause-code-mapping restricted-zone-code
Removes the configured cause code mapping.
restricted-zone-code emm-cause-code emm_cause_code
Specifies the EPS Mobility Management (EMM) cause code to return when a UE requests access to a
restricted zone.
restricted zone.
emm_cause_code
must be one of the following options:
eps-service-not-allowed-in-this-plmn
no-suitable-cell-in-tracking-area
- Default.
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
Usage
Use this command to configure the cause code returned to a UE when a UE requests access to a restricted
zone.
zone.
Related Commands:
To set the cause codes for situations where a call control profile cannot be attached to a call (for example
new-call restrictions, congestion during new call attempt, etc.), use the
new-call restrictions, congestion during new call attempt, etc.), use the
local-cause-code-mapping