Cisco Cisco ASR 5700
SGSN PSP Configuration Mode Commands
sctp-rto-initial ▀
Command Line Interface Reference, StarOS Release 17 ▄
8503
sctp-rto-initial
This command sets the initial retransmission timeout for the SCTP.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Peer-Server Configuration > PSP Configuration
configure > ss7-routing-domain routing_domain_id variant variant_type > peer-server id id
> psp instance psp_instance
> psp instance psp_instance
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-ss7rd_id-ps-peer-server_id-psp-psp_instance)#
Syntax
sctp-rto-initial value
default sctp-rto-initial
default
Resets the system to the
sctp-rto-initial
default of 30 (3 seconds).
value
The value must be an integer between 1 and 50.
Usage
Important:
Before using this command to set a value, you must disassociate the PSP instance with the
no
associate
command. When you have set the value with this command, then use the
associate
command to setup a
new association.
Use this command to define the initial retransmission timer.
The value set for
The value set for
sctp-rto-initial
should be greater than or equal to the minimum value set with
sctp-
rto-min
(
sctp-rto-initial
=>
sctp-rto-min
).
The value set for
sctp-rto-initial
should be less than or equal to the maximum value set with
sctp-
rto-max
(
sctp-rto-initial
<=
sctp-rto-max
).
Example
sctp-rto-initial 240