Cisco Cisco Packet Data Gateway (PDG)
PDG Service Configuration Mode Commands
associate sgtp-service ▀
Command Line Interface Reference, StarOS Release 17 ▄
7787
associate sgtp-service
Identifies the SGTP service to be associated with the PDG service to enable TTG functionality on the PDG/TTG. TTG
functionality supports GTP-C (GTP control plane) messaging and GTP-U (GTP user data plane) messaging between the
TTG and the GGSN over the Gn’ interface.
functionality supports GTP-C (GTP control plane) messaging and GTP-U (GTP user data plane) messaging between the
TTG and the GGSN over the Gn’ interface.
Important:
This command can be used before the associated service instance is created and configured but care
should be used to match the service names.
Product
PDG/TTG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDG Service Configuration
configure > context context_name > pdg-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdg-service)#
Syntax
[ no ] associate sgtp-service sgtp_service_name [ context sgtp_context_name ]
no
Removes the service association definition from the configuration.
sgtp-service
sgtp_service_name
Specifies which SGTP service configuration, by naming the SGTP service instance, to associate with this
PDG service.
PDG service.
sgtp_service_name
is an alphanumeric string of 1 through 63 characters with no spaces.
context
sgpt_context_name
Defines the context in which the SGTP service was created. If no context is specified, the current context is
used.
used.
sgtp_context_name
is an alphanumeric string of 1 through 63 characters with no spaces.
Usage
Use this command to associate the SGTP service to be associated with the PDG service to enable TTG
functionality on the PDG/TTG.
functionality on the PDG/TTG.
Example
The following command associates SGTP service
sgtp_service_1
with this PDG service:
associate sgtp-service sgtp_service_1 context sgtp_context_1