Cisco Cisco Tunnel Terminating Gateway (TTG)
EDR Module Configuration Mode Commands
file ▀
Command Line Interface Reference, StarOS Release 17 ▄
3635
omit
: Excludes the sequence number from the file name.
padded
: Includes the padded sequence number with preceding zeros in the file name. This is the default
setting.
padded-six-length
: Includes the padded sequence number with six preceding zeros in the file name.
unpadded
: Includes the unpadded sequence number in the file name.
single-edr-format
Creates separate files for EDRs having different formats.
Default: Disabled
Default: Disabled
storage-limit limit
Specifies deleting files when the specified amount of space (in bytes) is used up for EDR/UDR file storage
RAM on packet processing cards.
RAM on packet processing cards.
Important:
ASR 5000 and ASR 5500:
limit
must be an integer from 10485760 through 536870912. Default: 33554432
Important:
The total storage limit is 536870912 bytes (512 MB). This limit is for both UDR and EDR files
combined.
time-stamp { expanded-format | rotated-format | unix-format }
Specifies the timestamp of when the file was created be included in the file name.
expanded-format
: Specifies the UTC MMDDYYYYHHMMSS format.
rotated-format
: Specifies the time stamp format to YYYYMMDDHHMMSS format.
unix-format
: Specifies the UNIX format of
x
.
y
, where
x
is the number of seconds since 1/1/1970 and
y
is the fractional portion of the current second that has elapsed.
trailing-text string
Specifies the inclusion of an arbitrary text string in the file name.
string
must be an alphanumeric string of 1 through 30 characters.
trap-on-file-delete
Instructs the system to send an SNMP notification (starCDRFileRemoved) when an EDR/UDR file is deleted
due to lack of space.
Default: Disabled
due to lack of space.
Default: Disabled
unique-seq-num
Specifies that the file sequence numbers that are part of the EDR file names be independently generated. If
disabled, a single set of sequence numbers are shared by both UDR and EDR files.
Default: Disabled
disabled, a single set of sequence numbers are shared by both UDR and EDR files.
Default: Disabled