Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands N-R
▀ pcc-policy-service
▄ Command Line Interface Reference, StarOS Release 16
2574
Caution:
Large numbers of services greatly increase the complexity of management and may impact overall
system performance (for example, resulting from such things as system handoffs). Therefore, it is recommended that a
large number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
large number of services only be configured if your application absolutely requires it. Please contact your local service
representative for more information.
Entering this command results in the following prompt:
[context_name]hostname(config-pccpolicy-service)#
The commands available in this mode are defined in the PCC-Policy Service Configuration Mode Commands
chapter.
chapter.
Caution:
This is a critical configuration. The PCC-Policy service cannot be configured without this
configuration. Any change to this configuration would lead to restarting the PCC-Policy service and removing or
disabling this configuration will stop the PCC-Policy service.
disabling this configuration will stop the PCC-Policy service.
Example
The following command enters the existing PCC-Policy Service Configuration Mode (or creates it if it does
not already exist) for the service named
not already exist) for the service named
gx-service1
:
pcc-policy-service gx-service1
The following command will remove
gx-service1
from the system:
no pcc-policy-service gx-service1