Cisco Cisco Packet Data Interworking Function (PDIF)
GGSN Service Configuration Mode Commands
sgsn address ▀
Command Line Interface Reference, StarOS Release 16 ▄
5127
mcc
mcc_code
Specifies the mobile country code (MCC) portion of the PLMN’s identifier.
mcc_code
is the PLMN MCC identifier and configured as an integer from 100 through 999.
mnc
mnc_code
Specifies the mobile network code (MNC) portion of the PLMN’s identifier.
mnc_code
is the PLMN MNC identifier and configured as a 2- or 3-digit integer from 00 through 999.
rat-type {GAN | GERAN | HSPA | UTRAN | WLAN }
This keyword configures the type of radio access technology.
GAN
: Specifies the Generic Access Network type of Radio Access Technology (RAT).
GERAN
: Specifies the GSM EDGE Radio Access Network type of RAT.
HSPA
: Specifies the High Speed Packet Access type of RAT.
UTRAN
: Specifies the UMTS Terrestrial Radio Access Network type of RAT.
WLAN
: Specifies the Wireless Local Access Network type of RAT.
description
description
Add description field to the SGSN entry in GGSN service.
description
is an alphanumeric string of 1 through 63 characters.
Usage
Use this command to configure a list of SGSNs that the GGSN service is to communicate with. This
command can be entered multiple times to configure multiple SGSNs.
command can be entered multiple times to configure multiple SGSNs.
Important:
The GGSN only communicates with the SGSNs configured using this command unless a plmn-
policy is enabled to allow communication with unconfigured SGSNs. PLMN policies are configured using the plmn
unlisted-sgsn command.
unlisted-sgsn command.
Example
The following command configures the GGSN to communicate with an SGSN on a foreign PLMN with an IP
address of
address of
192.168.1.100
and subnet mask of
255.255.255.0
:
sgsn address 192.168.1.100 subnetmask 255.255.255.0 plmn-foreign