Cisco Cisco Aironet 350 Wireless LAN Client Adapter
27
Release Notes for Cisco Aironet 802.11a/b/g Client Adapters (CB21AG and PI21AG) Install Wizard 4.0
OL-14455-01
Caveats
Workaround: None.
•
CSCsj23076—Signal quality in CASSU is not consistent with current signal quality in the ADU
The signal strength quality percentage in the CASSU interface is not the same in the ADU interface.
When the device is taken out of access point range, the current signal quality is still 100% in the
ADU, but signal quality is 0% in the CASSU.
When the device is taken out of access point range, the current signal quality is still 100% in the
ADU, but signal quality is 0% in the CASSU.
Workaround: None.
•
CSCsj64455—Supported Features Advertisement information element bit 0 is 0 not 1 on the client
When client MFP is disabled on the controller for a particular WLAN, beacons and probe responses
that originate from APs in this WLAN have the SFA IE bit 0 set to 0. When a client associates with
WPA version 2(MFP) EAP, the SFA IE bit 0 is 0, not 1. When a client associates with WPA version
2 (MFP) EAP with CCKM, the SFA IE bit 0 is 0, not 1.
that originate from APs in this WLAN have the SFA IE bit 0 set to 0. When a client associates with
WPA version 2(MFP) EAP, the SFA IE bit 0 is 0, not 1. When a client associates with WPA version
2 (MFP) EAP with CCKM, the SFA IE bit 0 is 0, not 1.
Workaround: None.
•
CSCsj84780—ADU dimmed after installation
The ADU interface is dimmed even though the CB21AG client adapter is not configured to use
Windows Zero Configuration (WZC).
Windows Zero Configuration (WZC).
Workaround: Uninstall and reinstall the ADU software.
•
CSCsj85294—Clients with CB21AG at 100% CPU because of DPC and ISR
Wireless clients with CB21AG adapters sometimes run at 100% CPU for extended periods of time,
which causes slow wireless connections and disconnections. The process monitor spikes to 100%
CPU utilization because CPU is consumed by Deferred Procedure Calls (DPCs) and ISRs.
which causes slow wireless connections and disconnections. The process monitor spikes to 100%
CPU utilization because CPU is consumed by Deferred Procedure Calls (DPCs) and ISRs.
Workaround: None.
•
CSCsk01565—After LEAP domain logon, ADU usually asks for the authentication again
The client uses LEAP security with the automatic prompt option and WPA data encryption. When
the device is booted up, the user logs onto the domain. LEAP shows the progress of the
authentication and gets an IP address to log in. After login, LEAP asks for authentication data again.
the device is booted up, the user logs onto the domain. LEAP shows the progress of the
authentication and gets an IP address to log in. After login, LEAP asks for authentication data again.
Workaround: None.
•
CSCsk04387—PAC expires itself with local RADIUS server even if no expiration date is set
A network has two access points with local RADIUS servers for EAP-FAST authentication. Even if
the PAC has no expiration date, the PAC expires a few days after the initial authentication.
the PAC has no expiration date, the PAC expires a few days after the initial authentication.
Workaround: None.
•
CSCsk07088—WLC shows parsing error when client performs send message test in DC mode
After the client is configured with at least one valid WLAN profile, the client is associated to the
diagnostic channel. When the client initiates the send message portion of diagnostic channel mode
testing, the WLC shows a parsing error.
diagnostic channel. When the client initiates the send message portion of diagnostic channel mode
testing, the WLC shows a parsing error.
Workaround: None.
•
CSCsk08004—PC-MY18A computer (NEC MateNX) freezes when the ADU is installed
PC-MY18A computer (NEC MateNX) with PI21AG stalls with ADU installation and must be
rebooted.
rebooted.
Workaround: None.
•
CSCsk08053—Destination MAC address invalid with DNS ping test
After you connect CCXv5 client to the infrastructure device, start the DNS ping test from the
Diagnostics tab and wait for the test results. The MAC address is invalid.
Diagnostics tab and wait for the test results. The MAC address is invalid.