Cisco Cisco Aironet 350 Wireless LAN Client Adapter Guide De Montage
12
78-15680-05
Step 2
Slide the bracket away from the card; then tilt the bracket to free the
antenna cable.
antenna cable.
Caution
Do not pull on the antenna cable or detach it from the PCI card.
The antenna is meant to be permanently attached to the card.
The antenna is meant to be permanently attached to the card.
Step 3
Hold the low-profile bracket to the card so that the LEDs slip
through their corresponding holes on the bracket.
through their corresponding holes on the bracket.
Step 4
Insert the screws that you removed in Step 1 into the holes on the
populated side of the card near the bracket (see Figure 2) and
tighten.
populated side of the card near the bracket (see Figure 2) and
tighten.
Inserting the Card
Step 1
Turn off the PC and all its components.
Step 2
Remove the computer cover.