Cisco Cisco Packet Data Interworking Function (PDIF)
SaMOG Gateway Offline Charging
Configuring the SaMOG CDRs ▀
SaMOG Administration Guide, StarOS Release 17 ▄
75
Command
Default
Comment
gtpp attribute record-type
{sgwrecord | sgsnpdprecord }
{sgwrecord | sgsnpdprecord }
No
If not explicitly configured, the record type selection is based on the
SaMOG license used.
SaMOG license used.
Policy Accounting in Source Context
cc profile <index> buckets
<number>
<number>
index = 0-15
number = 4
number = 4
Specifies the number of traffic volume container changes due to QoS
changes or tariff time that can occur before an accounting record is
closed.
changes or tariff time that can occur before an accounting record is
closed.
cc profile <index> interval
<seconds>
<seconds>
No
Specifies the normal time duration that must elapse before an
accounting record is closed.
accounting record is closed.
cc profile <index> volume {
downlink <vol_down_octets>
uplink <vol-up_octets> | total
<total_octets> }
downlink <vol_down_octets>
uplink <vol-up_octets> | total
<total_octets> }
No
Specifies the downlink, uplink, and total volumes that must be met
before closing an accounting record.
before closing an accounting record.
vol_down_octets is measured in octets and can be
configured to any integer value from 100,000 to
4,000,000,000.
configured to any integer value from 100,000 to
4,000,000,000.
vol_up_octets is measured in octets and can be configured
to any integer value from 100,000 to 4,000,000,000.
to any integer value from 100,000 to 4,000,000,000.
total_octets is the total traffic volume (up and downlink)
measured in octets and can be configured to any integer
value from 100,000 to 4,000,000,000.
measured in octets and can be configured to any integer
value from 100,000 to 4,000,000,000.
cc profile <index> tariff time1
mins hours time2 mins hours
time3 mins hours time4 mins
hours
mins hours time2 mins hours
time3 mins hours time4 mins
hours
No
Specifies time-of-day time values to close the current traffic volume
container (but not necessarily the accounting record). Four different
tariff times may be specified. If less than four times are required, the
same time can be specified multiple times.
container (but not necessarily the accounting record). Four different
tariff times may be specified. If less than four times are required, the
same time can be specified multiple times.
Show Commands
show gtpp counters
None
Displays GTPP counters for configured charging gateway functions
(CGFs) within the given context.
(CGFs) within the given context.
show gtpp statistics
None
Displays GTPP statistics for configured CGFs within the context.
show gtpp storage-server
counters
counters
None
Displays counters pertaining to the configured GTPP storage server.
show gtpp storage-server
statistics
statistics
None
Displays statistics pertaining to the configured GTPP storage server.
show gtpp group
None
Displays information pertaining to the configured GTPP storage
server group.
server group.
Global Configuration Commands
gtpp single-source
None
Configures the system to reserve a CPU for performing a proxy
function for GTPP accounting. This command is mandatory for
dispatching S-CDR. If not specified during bootup, the S-GW CDRs
will be generated and buffered in the AAAMgr but not sent out. This
is as similar to charging not being done.
The maximum number of CDRs which will be buffered in AAAMgr
is 128 MB (by size) or 26400 CDRs (by count), whichever comes
first.
function for GTPP accounting. This command is mandatory for
dispatching S-CDR. If not specified during bootup, the S-GW CDRs
will be generated and buffered in the AAAMgr but not sent out. This
is as similar to charging not being done.
The maximum number of CDRs which will be buffered in AAAMgr
is 128 MB (by size) or 26400 CDRs (by count), whichever comes
first.