Cisco Cisco Packet Data Gateway (PDG) Fascicule
HSS Peer Service Configuration Mode Commands
request timeout ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6185
request timeout
Configures the application request timeout between the HSS peer service and HSS node. The MME/SGSN waits for this
duration before retransmitting the request to corresponding HSS node.
duration before retransmitting the request to corresponding HSS node.
Product
MME
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSS Peer Service Configuration
configure > context context_name > hss-peer-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hss-peer-service)#
Syntax
request timeout dur
[ no | default ] request timeout
no
Disables the configured application request timeout value.
default
Sets the application request time out duration to default value of 300 seconds.
dur
Specifies the application request timeout duration (in seconds) as an integer from 1 through 300. The
MME/SGSN will wait for this duration before retrying the request with corresponding HSS. Default: 20
MME/SGSN will wait for this duration before retrying the request with corresponding HSS. Default: 20
Usage
Use this command to set the waiting period for HSS peer service in seconds after which the request is deemed
to have failed or system will resend the request.
to have failed or system will resend the request.
Example
The following example configures the application request timeout duration to 20 seconds:
default request timeout