Cisco Cisco Tunnel Terminating Gateway (TTG) Fascicule
Card Configuration Mode Commands
link-aggregation ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2017
Usage
The system MAC address (6 bytes) and system priority (2 bytes) combine to form the system ID. A system
consists of a packet processing card and its associated ASR 5000 QGLCs or XGLCs, or ASR 5500 MIO
traffic ports. The highest system ID priority (the lowest number) handles dynamic changes.
For additional usage and configuration information for the link aggregation feature, refer to the System
Administration Guide.
consists of a packet processing card and its associated ASR 5000 QGLCs or XGLCs, or ASR 5500 MIO
traffic ports. The highest system ID priority (the lowest number) handles dynamic changes.
For additional usage and configuration information for the link aggregation feature, refer to the System
Administration Guide.
Important:
Not supported on all platforms
Example
The following command configures the link aggregation system-priority to 10640 (
0x2990
):
link-aggregation system-priority 0x2990