Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE Manuel De Maintenance
Getting Started
Using the Access Point Setup Wizard
Cisco WAP131 and WAP351 Administration Guide
12
1
Configuring Cisco WAP131 Setup Wizard
Follow these steps to complete the wizard (you must log in again after changing
your password):
your password):
STEP 1
Click Next on the Welcome page of the wizard. The Configure Device - IP Address
window appears.
window appears.
STEP 2
Click Dynamic IP Address (DHCP) if you want the WAP device to receive an IP
address from a DHCP server, or click Static IP Address to configure the IP
address manually. For a description of these fields, see
address from a DHCP server, or click Static IP Address to configure the IP
address manually. For a description of these fields, see
STEP 3
Click Next. The Configure Device - Set System Date and Time window appears.
STEP 4
Select your time zone and then set the system time manually or set up the WAP
device to get its time from an NTP server. For a description of these options, see
device to get its time from an NTP server. For a description of these options, see
STEP 5
Click Next. The Configure Device - Set Password window appears.
STEP 6
Enter a new password in the New Password field and enter it again in the Confirm
Password field.
Password field.
NOTE
Uncheck Password Complexity if you want to disable the password
security rules. However, we strongly recommend keeping the password security
rules enabled. For more information about passwords, see
rules enabled. For more information about passwords, see
STEP 7
Click Next. The Configure Radio 1 - Name Your Wireless Network window
appears.
appears.
STEP 8
Enter a Network Name. This name serves as the SSID for the default wireless
network.
network.
STEP 9
Click Next. The Configure Radio 1 - Secure Your Wireless Network window
appears.
appears.
STEP 10
Choose a security encryption type and enter a security key. For a description of
these options, see
these options, see
.
STEP 11
Click Next. The Configure Radio 1 - Assign The VLAN ID For Your Wireless
Network window appears.
Network window appears.
STEP 12
Enter a VLAN ID for traffic received on the wireless network.