Philips AVENT Digital Video Baby Monitor SCD600/00 SCD600/00 Manuel D’Utilisation

Do not position the baby unit with the microphone facing downwards. When the microphone 

is blocked by the base, the baby unit does not pick up sounds properly. 

 4 

 Place the parent unit within the operating range of the baby unit. Make sure it is at least 1 

metre/3 feet away from the baby unit to avoid acoustic feedback (Fig. 21).

For more information on the operating range, see section ‘Operating range’ below.

The operating range of the baby monitor is 150 metres/490 feet in open air. Depending on the 

surroundings and other disturbing factors, this range may be smaller. 

Dry materials

Material thickness

Loss of range

Wood, plaster, cardboard, glass 

(without metal, wires or lead)

< 30cm/12in

0-10%

Brick, plywood

< 30cm/12in

5-35%

Reinforced concrete

< 30cm/12in

30-100%

Metal grilles or bars

< 1cm /0.4in

90-100%

Metal or aluminium sheets

< 1cm/0.4in

100%

For wet and moist materials, the range loss may be up to 100%.

You can adjust the loudspeaker volume of the parent unit to the level you prefer. 

 1 

 Turn the volume wheel to adjust the volume.  (Fig. 14)

You can adjust the display brightness of the parent unit to the level you prefer. 

 1 

 Press the brightness adjustment buttons on the parent unit to adjust the brightness of the 

video display.  (Fig. 22)

The parent unit continuously monitors the sound level in your baby’s room and the sound level 

lights let you know if there is any activity. If your baby cries, the green sound level lights light up on 

the parent unit. 

 - As long as the baby unit does not detect a sound, all sound level lights on the parent unit are 

out.

 - When the baby unit picks up a sound, one or more sound level lights on the parent unit go on. 

The number of lights that go on is related to the loudness of the sound picked up by the baby 

unit. The sound level lights also go on when the parent unit is set to a low volume or when the 

automatic screen activation mode is activated (see section ‘Automatic screen activation’ 

below) (Fig. 23).

10