Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manuel De Maintenance
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Client Quality of Service
Class Map
Cisco WAP571/E Administration Guide
123
8
-
Select From List—Matches the selected protocol: IP, ICMP, IGMP, TCP,
UDP.
UDP.
-
Match to Value—Matches a protocol that is not listed by name. Enter the
protocol ID. The protocol ID is a standard value assigned by IANA. The
range is a number from 0 to 255.
protocol ID. The protocol ID is a standard value assigned by IANA. The
range is a number from 0 to 255.
•
Source IP—Requires a packet's source IPv4 address to match the IPv4
address defined in the appropriate fields.
address defined in the appropriate fields.
-
Source IP Address—Enter the IPv4 address to apply this criteria.
-
Source IP Mask—Enter the source IPv4 address mask. The mask for
DiffServ is a network-style bit mask in IP dotted decimal format indicating
which part(s) of the destination IP address to use for matching against
packet content.
DiffServ is a network-style bit mask in IP dotted decimal format indicating
which part(s) of the destination IP address to use for matching against
packet content.
A DiffServ mask of 255.255.255.255 indicates that all bits are important, and a
mask of 0.0.0.0 indicates that no bits are important. The opposite is true with an
ACL wildcard mask. For example, to match the criteria to a single host address,
use a mask of 255.255.255.255. To match the criteria to a 24-bit subnet (for
example, 192.168.10.0/24), use a mask of 255.255.255.0.
mask of 0.0.0.0 indicates that no bits are important. The opposite is true with an
ACL wildcard mask. For example, to match the criteria to a single host address,
use a mask of 255.255.255.255. To match the criteria to a 24-bit subnet (for
example, 192.168.10.0/24), use a mask of 255.255.255.0.
•
Source Port—Includes a source port in the match condition for the rule.
The source port is identified in the datagram header.
The source port is identified in the datagram header.
-
Select From List—Matches a keyword associated with the source port:
ftp, ftpdata, http, smtp, snmp, telnet, tftp, www. Each of these keywords
translates into its equivalent port number.
ftp, ftpdata, http, smtp, snmp, telnet, tftp, www. Each of these keywords
translates into its equivalent port number.
-
Match to Port—Matches the source port number in the datagram header
to an IANA port number that you specify. The port range is from 0 to
65535 and includes three different types of ports:
to an IANA port number that you specify. The port range is from 0 to
65535 and includes three different types of ports:
0 to 1023-Well-Known Ports
1024 to 49151-Registered Ports
49152 to 65535-Dynamic and/or Private Ports
-
Mask—The port mask. The mask determines which bits are used and
which bits are ignored. Only the hexadecimal digit (0-0xFFFF) is allowed.
1 means the bit matters and 0 means that we should ignore this bit.
which bits are ignored. Only the hexadecimal digit (0-0xFFFF) is allowed.
1 means the bit matters and 0 means that we should ignore this bit.
•
Destination IP—Requires a packet's destination IPv4 address to match the
IPv4 address defined in the appropriate fields.
IPv4 address defined in the appropriate fields.
-
Destination IP Address—Enter the IPv4 address to apply this criteria.