Cisco Cisco Aironet 1200 Access Point Guide De Montage
10
•
The following information from your network system administrator:
– The case-sensitive wireless service set identifier (SSID) for your
radio network
– If not connected to a DHCP server, a unique IP address for your
access point (such as 172.17.255.115)
– If the access point is not on the same subnet as your PC, a default
gateway address and subnet mask
Note
Plan to configure the access point before mounting it in a relatively
inaccessible location. Some steps, such as those requiring a serial
cable, are easier to perform if the access point is accessible.
inaccessible location. Some steps, such as those requiring a serial
cable, are easier to perform if the access point is accessible.
Attaching and Adjusting the Antennas
2.4-GHz Dipole Antennas
Attach the antennas to the Reverse-Polarity Threaded Naval Connector
(RP-TNC) connectors on the back of the access point and tighten hand tight.
(RP-TNC) connectors on the back of the access point and tighten hand tight.