Cisco Cisco Prime Network Registrar 8.0 Guide De Dépannage
3.3.2 Disaster Recovery Procedure
This section describes the procedure necessary to initiate a DR
event or exercise under this scenario.
3.3.2.1 Bring the DR Executive online
Enable the IP connectivity of the DR Executive by
either physically connecting it to the network, or by
enabling the switch port to which it is connected.
enabling the switch port to which it is connected.
3.3.2.2 Start all Cisco Prime Network Registrar IPAM services on the DR
Executive
3.3.2.2.1 Linux/Solaris
Run the Cisco Prime Network Registrar IPAM script to start
all services on the DR Executive:
> $INCHOME/etc/incontrol start
all services on the DR Executive:
> $INCHOME/etc/incontrol start
3.3.3 Return to Normal
This section describes the procedure necessary to return to
normal operation where the Production Executive is online,
normal operation where the Production Executive is online,
and the DR Executive is offline.
3.3.3.1 Take the DR Executive offline
Disable the IP connectivity of the DR Executive by
either physically disconnecting it from the network, or
by disabling the switch port to which it is connected.
by disabling the switch port to which it is connected.
3.3.3.2 Bring the Production Executive online
Enable the IP connectivity of the Production Executive
by either physically connecting it to the network, or by
enabling the switch port to which it is connected.
by either physically connecting it to the network, or by
enabling the switch port to which it is connected.
3.3.3.3 Start Cisco Prime Network Registrar IPAM Services on Production
Executive
3.3.3.3.1 Linux/Solaris
Run the Cisco Prime Network Registrar IPAM script to start
all services on the Production Executive:
> $INCHOME/etc/incontrol start
all services on the Production Executive:
> $INCHOME/etc/incontrol start